vsf member remove

This command removes the entire configuration for a specified member. After issuing the command, the specified member-ID is available for re-use and may be provisioned or assigned to another device.

If the member physically exists, its configuration will be erased. It will then be powered down by default.

Syntax

vsf member <MEMBER-ID> remove

Description

This command erases the VSF member configuration and VSF member will be powered off.

Parameters

<MEMBER-ID>

The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to 2.

Restriction

This command will not be available until VSF is enabled.