Viewing transceiver information

The transceiver information displayed depends on the show command executed.

The output for show interfaces transceiver [port-list] is shown below. You can specify multiple ports, separated by commas, and the information for each transceiver will display.

Output for a specified transceiver

switch(config)# show interfaces transceiver 21

Transceiver Technical information:

                     Product      Serial             Part
 Port    Type        Number       Number             Number
 ------- ----------- ------------ ------------------ ----------
 21      1000SX      J4858C       MY050VM9WB         1990-3657

If there is no transceiver in the port specified in the command, the output displays as shown below.

Output when no transceiver is present in specified interface

switch(config)# show interfaces transceiver 22

 No Transceiver found on interface 22

When no ports are specified, information for all transceivers found is displayed.

Output when no ports are specified

switch(config)# show interfaces transceiver

 Transceiver Technical information:

                      Product      Serial             Part
  Port    Type        Number       Number             Number
  ------- ----------- ------------ ------------------ ----------
  21      1000SX      J4858C       MY050VM9WB         1990-3657
  22      1000SX      J4858B       P834DIP2

You can specify all for port-list as shown below.

Output when “all” is specified

switch(config)# show interfaces transceiver all

 No Transceiver found on interface 1

 No Transceiver found on interface 2
.
.
.
 No Transceiver found on interface 24

 Transceiver Technical information:

                      Product      Serial             Part
  Port    Type        Number       Number             Number
  ------- ----------- ------------ ------------------ ----------
  21      1000SX      J4858C       MY050VM9WB         1990-3657
  22      1000SX      J4858B       P834DIP2