copy event-log

Syntax

copy event-log [smm] [tftp <IP-ADDRESS> <FILEPATH_FILENAME> [oobm]] [usb <FILENAME>] [xmodem <FILENAME>]
        

Description

These commands copy the Event Log content to a remote host, attached USB device, or to a serially connected PC or UNIX workstation.

Parameters

smm

Copies the entire Event Log, both active management module events and standby management module events, to the selected host, USB device, or serially connected PC or UNIX workstation.

oobm

For switches that have a separate OOBM port, the oobm parameter specifies that the transfer is through the OOBM interface. If this parameter is not specified, the transfer is through the data interface. The oobm parameter is not available on switches that do not have a separate OOBM port.

Copy the event log to a PC connected to the switch

Figure 98: Sending event log content to a file on an attached PC