Enabling or disabling notification/traps for network security failures and other security events (CLI)

Syntax:

no snmp-server enable traps [arp-protect | auth-server-fail | dhcp-server 
| dhcp-snooping | dhcpv6-snooping | dyn-ip-lockdown | dyn-ipv6-lockdown | link-change 
| login-failure-mgr | mac-count-notify | mac-notify | macsec | nd-snooping | password-change-mgr 
| port-security | running-config-change | snmp-authentication | startup-config-change | vsf ]

Enables or disables sending one of the security notification types listed below to configured trap receivers. (Unless otherwise stated, all of the following notifications are enabled in the default configuration.)

The notification sends a trap:

arp-protect

Traps for Dynamic ARP Protection.

auth-server-fail

Traps reporting authentication server unreachable.

dhcp-server

Traps for DHCP-Server.

dhcp-snooping

Traps for DHCP-Snooping.

dhcpv6-snooping

Set the traps for DHCPv6 snooping.

dyn-ip-lockdown

Traps for Dynamic Ip Lockdown.

dyn-ipv6-lockdown

Enable traps for Dynamic IPv6 Lockdown.

link-change

Traps for link-up and link-down.

login-failure-mgr

Traps for management interface login failure.

mac-count-notify

Traps for MAC addresses learned on the specified ports exceeds the threshold.

mac-notify

Traps for (learned/removed) MAC address table changes.

macsec

Configure the traps for MACsec notifications.

nd-snooping

Set the trap for nd snooping

password-change-mgr

Traps for management interface password change.

port-security

Traps for port access authentication failure.

running-config-change

Traps for running config change.

snmp-authentication [extended | standard]

Select RFC-1157 (standard) or ICF-SNMP (extended) traps.

Startup-config-change

Traps for changes to the startup configuration.

vsf

Enable traps for the VSF functionality.

To determine the specific cause of a security event, check the Event Log in the console interface to see why a trap was sent. For more information, see "Using the Event Log for Troubleshooting Switch Problems".