auto tftp


auto-tftp ipv6-addr filename


Configures the switch to download automatically the specified software file from the TFTP server at the specified IPv6 address. The file is downloaded into primary flash memory at switch startup. The switch then automatically reboots from primary flash.


The no form of the command disables auto-TFTP operation by deleting the auto-tftp entry from the startup configuration.


The no auto-tftp command does not affect the current TFTP-enabled configuration on the switch. However, entering the ip ssh filetransfer command automatically disables both auto-tftp and tftp operation.


To enable auto-TFTP to copy a software image to primary flash memory, the version number of the downloaded software file (for example, K_14_01.swi) must be different from the version number currently in the primary flash image.