Implementing IPv6 ACLs

Procedure
  1. Configure one or more ACLs.
  2. This creates and stores the ACLs in the switch configuration.
  3. Assign an ACL to an interface using one of the following applications:
    1. RACL (routed IPv6 traffic entering or leaving the switch on a given VLAN)
    2. VACL (IPv6 traffic entering or leaving the switch on a given VLAN)
    3. Static port ACL (IPv6 traffic entering or leaving the switch on a given port, port list, or static trunk)
  4. If the ACL is applied as an RACL, IPv6 routing must be enabled. Except for instances where the switch is the traffic source or destination, assigned RACLs filter IPv6 traffic only when IPv6 routing is enabled on the switch.