Unprovisioning FUP with stacking enabled

Use the CLI command to remove a provisioned FP module.

Syntax

stacking member <STACK-MEMBER> flexible-module <SLOT-ID> remove

Description

Specify a flexible module to be removed.

Parameters

  • stack-member

    Specify the stack-member in the range 1–10.

  • SLOT-ID

    Specify an alphabetic device slot identifier, such as A or B.

Example output

switch(config)# show run

Running configuration:

; Stack_KB Configuration Editor; Created on release #KB.16.01.0000x
; Ver #0b:7c.59.f4.7b.ff.ff.fc.ff.ff.3f.ef:8d

stacking
   member 1 type "JL071A" mac-address 9457a5-8c5600
   member 1 flexible-module A type JL083A
   member 2 type "JL075A" mac-address 5065f3-12ef00
   exit
hostname "Switch"
no rest-interface
snmp-server community "public" unrestricted
oobm
   ip address dhcp-bootp
   member 1
      ip address dhcp-bootp
      exit
   member 2
      ip address dhcp-bootp
      exit
   exit
vlan 1
   name "DEFAULT_VLAN"
   untagged 1/1-1/24,1/A1-1/A4,2/1-2/16
   ip address dhcp-bootp
   exit
switch(config)# stacking member 1 flexible-module A remove
switch(config)# show run

Running configuration:

; Stack_KB Configuration Editor; Created on release #KB.16.01.0000x
; Ver #0b:7c.59.f4.7b.ff.ff.fc.ff.ff.3f.ef:8d

stacking
   member 1 type "JL071A" mac-address 9457a5-8c5600
   member 2 type "JL075A" mac-address 5065f3-12ef00
   exit
hostname "Switch"
no rest-interface
snmp-server community "public" unrestricted
oobm
   ip address dhcp-bootp
   member 1
      ip address dhcp-bootp
      exit
   member 2
      ip address dhcp-bootp
      exit
   exit
vlan 1
   name "DEFAULT_VLAN"