Show command for MACsec status on a port

Syntax

show macsec status <port-num>
    

Show the status of all MACsec-enabled ports.

show macsec status

switch(config)# show macsec status A1

show command output

switch(config)# show macsec status A1
Status and Configuration - MACsec Protocol
Interface : A1
Policy       : Policy1
Transmitting : Yes
Receiving    : Yes
Protection   : Confidentiality
Transmit secure Channel
SCI                  : 000C29F6A4380004c
Secure Association
Association Number : 1 (old)
KI               : 4F18CE25228178FD15976E4C
LPN                : 2
SA-Start-time      : 01:02:19 
SA-Stop-time       : 02:04:29
Association Number : 0 (current)
KI               : 4F18CE25228178FD15976E4C
LPN                : 3
SA-Start           : 04:05:11
SA-Stop-time       : 04:10:12
Receive secure Channel
SCI                  : 000C29F6A4380003b
Secure Association
Association Number : 0 (current)
KI               : 4F18CE29456aefFD15976E4C
LPN                : 121198
SA-Start           : 04:05:12
SA-Stop-time       : 04:10:13

Validation

Error/Warning/Prompt

Check whether MACsec is enabled on the port.

MACsec is not enabled on port %s.