Disabling the clear password function of the Clear button

Syntax 

no front-panel-security password-clear

In the factory-default configuration, pressing the Clear button on the switch front panel erases any local user names and passwords configured on the switch. This command disables the password clear function of the Clear button, so that pressing it has no effect on any local user names and passwords.

For redundant management systems, this command only affects the active management module.

Default: enabled.

NOTE:

Although the Clear button does not erase passwords when disabled, you can still use it with the Reset button, Reset+Clear, to restore the switch to its factory default configuration, as described under Restoring the factory default configuration.

This command displays a Caution message in the CLI. If you want to proceed with disabling the Clear button, type [Y]; otherwise type [N]. For example:

Figure 18: Disabling the Clear button and displaying the new configuration