radius-server tls timeout

Syntax

radius-server tls timeout <Seconds>

Description

Configures the RADIUS server response timeout. Default timeout is 30 seconds.

Command context

config

Parameter

seconds

Specifies the timeout in seconds. Range is <5–240> seconds.

Usage

If the established session is active and RADIUS server is not responding to the requests for the specified timeout, then the next configured server is considered. For deployments where RadSec servers are distributed across WAN, it is recommended to configure the time out to a larger value.

Example

switch(config)#  radius-server tls timeout
 <5-240>          Enter an integer number.