show vsf topology

Syntax

show vsf topology

Description

This command shows information about VSF virtual chassis member connections.

Example output

switch# show vsf topology

 VSF member's interconnection with links:

                   Stby                                         Cmdr
 +---+    +---+    +---+    +---+    +---+    +---+    +---+    +---+
 | 1 |1==1| 2 |2==1| 3 |2==1| 4 |2==1| 5 |2==1| 6 |2==2| 8 |1==2| 7 |
 +---+    +---+    +---+    +---+    +---+    +---+    +---+    +---+
The preceding example shows:
  • Member ID 1 Link 1 is connected to Member ID 2 Link 1.

  • Member ID 2 Link 2 is connected to Member ID 3 Link 1.

  • Member ID 3 Link 2 is connected to Member ID 4 Link 1.

  • Member ID 4 Link 2 is connected to Member ID 5 Link 1.

  • Member ID 5 Link 2 is connected to Member ID 6 Link 1.

  • Member ID 6 Link 2 is connected to Member ID 8 Link 2.

  • Member ID 8 Link 1 is connected to Member ID 7 Link 2.

  • Member ID 3 is current VSF standby.

  • Member ID 7 is current VSF commander.

NOTE:

Set the terminal width to 100 for a better alignment of the topology diagram. Default width: 80.