show ipv6 ospf3 neighbor

Syntax

show ipv6 ospf3 neighbor [ router-id ][ detail ]

Description

Displays OSPFv3 information learned for neighbor routers.

Options

router-id

Displays information for a specific neighbor router.

detail

Displays additional, neighbor-specific OSPFv3 information.

Example output

This example shows the show ipv6 ospf3 neighbor command output:
Switch(ospf3)# show ipv6 ospf3 neighbor

 OSPFv3 Neighbor Information

  Interface Router ID       Pri   State      Rxmt QLen  Events
  --------- --------------- ----- ---------- ---------- ------
  Vlan-55   15.1.0.1        1     FULL       0          0
  Vlan-75   15.1.1.2        1     FULL       0          0
  tunnel-3   4.3.2.1        1     Full       0          0

show ipv6 ospf3 neighbor detail output

Switch(ospf3)# show ipv6 ospf3 neighbor 15.1.0.1 detail

 OSPFv3 Neighbor Information for neighbor 15.1.0.1

  IPv6 Address  : fe80::55:1
  Router ID  : 15.1.0.1     State                    : FULL
  Interface  : vlan-55      Designated Router        : 15.1.0.1
  Area       : 0.0.0.1      Backup Designated Router : 15.1.0.4
  Priority   : 1            Retransmit Queue Length  : 0
  Options    : 19           Neighbor Uptime          : 1days
  Events     : 0            Dead Timer Expires       : 33 sec

 OSPFv3 Neighbor Information for neighbor 15.1.0.1

  IPv6 Address  : fe80::55:1
  Router ID  : 15.1.0.1     State                    : FULL
  Interface  : tunnel-3     Designated Router        : 0.0.0.0
  Area       : 0.0.0.1      Backup Designated Router : 0.0.0.0
  Priority   : 1            Retransmit Queue Length  : 0
  Options    : 19           Neighbor Uptime          : 1days
  Events     : 0            Dead Timer Expires       : 33 sec