Turning ON FUPs in savepower status with stacking enabled

Syntax

no savepower flexible-module <SLOT-ID> member <STACK-MEMBER>

Description

Disable save power for FUP in a stack.

Parameters

  • SLOT-ID

    Specify an alphabetic device slot identifier A.

  • stack-member

    Specify the stack-member to be configured in the range 1–10.

Example output

switch(config)# no savepower flexible-module A member 3 
switch(config)# show modules

Status and Counters - Module Information


  Stack ID       : 0100e007-1bdab580                              
 
  Member                                                                      
  ID     Slot     Module Description                  Serial Number    Status 
  ------ -------- ----------------------------------- ---------------- -------
  1      STK      Aruba JL325A 2p Stacking Module                      Up     
  2      STK      Aruba JL325A 2p Stacking Module                      Up     
  3      A        Aruba JL081A 4p 10GbE XGT Module    SG6ZGZ4226       Booting
  3      STK      Aruba JL325A 2p Stacking Module                      Up     
  4      STK      Aruba JL325A 2p Stacking Module                      Up
  
  switch(config)# show modules

Status and Counters - Module Information


  Stack ID       : 0100e007-1bdab580                              
 
  Member                                                                      
  ID     Slot     Module Description                  Serial Number    Status 
  ------ -------- ----------------------------------- ---------------- -------
  1      STK      Aruba JL325A 2p Stacking Module                      Up     
  2      STK      Aruba JL325A 2p Stacking Module                      Up     
  3      A        Aruba JL081A 4p 10GbE XGT Module    SG6ZGZ4226       Up     
  3      STK      Aruba JL325A 2p Stacking Module                      Up     
  4      STK      Aruba JL325A 2p Stacking Module                      Up