Setting Forced Fast-Leave using the MIB
Fast-Leave and Forced Fast-Leave options for a port can also be set through the switch MIB (Management Information Base).
Feature |
Default |
Settings |
Function |
|---|---|---|---|
Forced Fast-Leave state |
2 (disabled) |
1 (enabled) |
Uses the setmib command to enable or disable Forced Fast-Leave on individual ports. When enabled on a port, Forced Fast-Leave operates only if the switch detects multiple end nodes (and at least one IGMP client) on that port |
| 2 (disabled) |
VLAN Numbers
In the switches covered in this manual, the walkmib and setmib commands use an internal VLAN number, not the VLAN ID or VID, to display or change many per-vlan features, such as the Forced Fast-Leave state. Because the internal VLAN number for the default VLAN is always 1, whether or not VLANs are enabled on the switch, examples herein use the default VLAN.