Viewing the VACL assignments for a VLAN

This command briefly lists the identification andtypes of IPv4 and IPv6 VACLs currently assigned to a particular VLAN in the running-config file.

Syntax:


show access-list vlan <vid>

Lists the current IPv4 and IPv6 ACL assignments to the specified VLAN (in the running config file).

NOTE:

This information also appears in the show running display. If you execute write memory after configuring an ACL, it also appears in the show config display.

Example:

The following output shows that all inbound IPv6 traffic and the inbound and outbound, routed IPv4 traffic are all filtered on VLAN 20.

Figure 48: Listing the ACL assignments for a VLAN