Fault Events

The following are the events related to fault.

Event ID: 327

Message
port <PORT_NUM>-Excessive undersized/giant packets. See help.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description Port has been unblocked on VLAN by PVST.

Event ID: 328

Message
port <PORT_NUM> Excessive jabbering/fragments. See Help
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description PVST root port has changed.

Event ID: 329

Message
port <PORT_NUM> -Excessive CRC/alignment errors. See help.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description Port has been blocked by MSTP.

Event ID: 330

Message
port <PORT_NUM> -Excessive late collisions.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description Port has been unblocked by MSTP.

Event ID: 331

Message
port <PORT_NUM> -High collision or drop rate. See help.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description MSTP root port has changed.

Event ID: 332

Message
port <PORT_NUM>-Excessive Broadcasts. See help.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description The number of configured MSTP instances exceeds the limit of instances permitted on a stack.

Event ID: 333

Message
port <PORT_NUM> - Loss of Link
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Information
Description MSTP BPDU throttling is disabled because QinQ is enabled.

Event ID: 334 (Severity: Warning)

Message
Port <PORT_NUM> - Security violation caused by MAC address <MAC_ADDRESS>.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description MSTP BPDU throttling is disabled because Meshing is enabled.

Event ID: 380 (Severity: Warning)

Message
port <PORT_NUM> - Disabled due to speed mismatch. See help.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description The reason why the management port has due to speed mismatch see help.

Event ID: 402 (Severity: Warning)

Message
Stack member <STACK ID> lost.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description The reason why the management member has lost.

Event ID: 883 (Severity: Warning)

Message
Port failure. Port <PORT_ID> has been reset.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description The reason why the management failure has id has been reset.

Event ID: 2671 (Severity: Warning)

Message
Port <PORT_ID> has been downgraded to 10/100. See www.hp.com/networking/device_help/nic_update for details.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description The reason why the management port has been downgraded to see www hp com networking device help nic update for details.

Event ID: 2672 (Severity: Fatal)

Message
port <PORT_NUM> -Excessive link state transitions
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Fatal
Description The reason why the management port has link state transitions.

Event ID: 2673 (Severity: Fatal)

Message
port <PORT_NUM> -Port disabled by Fault-finder.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Fatal
Description The reason why the management port has disabled by fault finder.

Event ID: 2674 (Severity: Fatal)

Message
port <PORT_NUM> -Administrator action required to re-enable.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Fatal
Description The reason why the management port has action required to re enable.

Event ID: 2675 (Severity: Warning)

Message
port <PORT_NUM> -Excessive Broadcasts. Broadcast-storm control threshold <THRESHOLD_VALUE> pps exceeded.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description To send logs when broadcast storm control is enabled on per port basis - fault finder.

Event ID: 2676 (Severity: Warning)

Message
port <PORT_NUM>-Excessive Broadcasts. Broadcast-storm control threshold <THRESHOLD_VALUE> percent exceeded.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description To send logs when broadcast storm control is enabled on per port basis - fault finder.

Event ID: 5514 (Severity: Warning)

Message
port <PORT ID> is receiving excessive non-standard Ethernet preambles. If this reoccurs frequently- check the connected device to ensure it complies with the Ethernet standard.
Platforms KB, WB, WC, YA, YB, YC
Category Fault
Severity Warning
Description The reason why the management port has receiving excessive non standard ethernet preambles if this reoccurs frequently check the connected device to ensure it complies with the ethernet standard.

Event ID: 5737

Message
port <PORT_NAME>-Excessive Multicasts. See help.
Platforms KB, WC, YA, YB, YC
Category Fault
Severity Information
Description This message will be logged by fault finder module if there is multicast storm.

Event ID: 5739 (Severity: Warning)

Message
port <PORT_NAME> -Excessive Multicasts. Multicast-storm control threshold <THRESHLD_VALUE> percent exceeded.
Platforms KB, WC, YA, YB, YC
Category Fault
Severity Warning
Description This event is used to indicate by fault-finder for multicast-storm when the threshold percent exceeded.

Event ID: 5740 (Severity: Warning)

Message
port <PORT_NAME> -Excessive Multicasts. Multicast-storm control threshold <THRESHLD_VALUE> pps exceeded.
Platforms KB, WC, YA, YB, YC
Category Fault
Severity Warning
Description This event is used to indicate by fault-finder for multicast-storm when the threshold pps exceeded.

Event ID: 5753

Message
Port-security disable timer set for port:<PORT_NAME>
Platforms KB, WC
Category Fault
Severity Information
Description This message will be logged when port-security disable timer set for port:<PORT_NAME>

Event ID: 5754

Message
port-security disable timer expired for port:<PORT_NAME>
Platforms KB, WC
Category Fault
Severity Information
Description This message will be logged when port-security disable timer expired for port:<PORT_NAME>

Event ID: 5885 (Severity: Warning)

Message
Firmware downgrade is not allowed when port-security with mixed learn-mode is configured on any of the switch ports.Please remove port-security configuration with mixed learn-mode to continue the downgrade.
Platforms KB, WC
Category Fault
Severity Warning