int poe-lldp-detect

Syntax

int <PORT-LIST> poe-lldp-detect [enabled|disabled]
    

Description

Allows the data link layer to be used for power negotiation between a PD on a PoE port and LLDP.

Default: Disabled

Enable LLDP

switch(config) # int 7 PoE-lldp-detect enabled

Interface context

switch(eth-7) # PoE-lldp-detect enabled
NOTE:

Detecting PoE information via LLDP affects only power delivery; it does not affect normal Ethernet connectivity.

Port with LLDP configuration information obtained from the device

switch(config)# show power-over-ethernet brief
Status and Counters - Port Power Status
System Power Status    : No redundancy
PoE Power Status       : No redundancy

Available: 273 W  Used: 0 W Remaining: 273 W

Module A Power
Available: 273 W  Used: 0 W Remaining: 273 W

PoE   | Power  Power     Alloc Alloc  Actual Configured Detection  Power
Port  | Enable Priority  By    Power  Power  Type       Status     Class
------  ------ --------- ----- ----- ------ ----------- ----------- ---
Pre-std
Detect
------
A1     | Yes    low      usage  17 W  0.0 W            Searching   0
off
A2     | Yes    low      usage  17 W  0.0 W            Searching   0
off
A3     | Yes    critical usage  17 W  0.0 W            Searching   0
off
A4     | Yes    critical usage  17 W  0.0 W            Searching   0
off
A5     | Yes    critical usage  17 W  0.0 W            Searching   0
off
A6     | Yes    high     usage  17 W  0.0 W            Searching   0
off
A7     | Yes    high     usage  17 W  0.0 W            Searching   0
off
A8     | Yes    high     usage  17 W  0.0 W            Searching   0
off
A9     | Yes    low      usage  17 W  0.0 W            Searching   0
off
A10    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A11    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A12    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A13    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A14    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A15    | Yes    low      usage  17 W  0.0 W            Searching   0
off
A16    | Yes    low      usage  17 W  0.0 W            Searching   0
Port with LLDP configuration