vsf lldp-mad ipv4

Syntax

vsf lldp-mad ipv4 <IPV4_ADDR> v2c <COMMUNITY-STR>

no vsf lldp-mad ipv4 <IPV4_ADDR> v2c <COMMUNITY-STR>

Description

Enable LLDP-MAD on the VSF device.

NOTE:

The command vsf lldp mad requires a peer switch to be configured as the "assist" device. LLDP-MAD is applicable only for a two-member VSF stack.

Parameters

<IPV4_ADDR>

The IPv4 address of the MAD (Multi-Active Detection) device.

<COMMUNITY-STR>

The SNMP community string for the MAD (Multi-Active Detection) device.

Usage

switch(config)# vsf lldp-mad ipv4

switch(config)# vsf lldp-mad ipv4 <IPv4_ADDR>

switch(config)# vsf lldp-mad ipv4 <MAD-IP-ADDRESS> v2c

switch(config)# vsf lldp-mad ipv4 210.10.0.12 v2c <COMMUNITY-STR>