vsf member type

Syntax

vsf member <MEMBER-ID> type <TYPE> [mac <MAC-ADDR>]

Description

Configure the family of the VSF member-switch being provisioned. After provisioning, the VSF member-switch can be configured as if it were physically present. When an VSF member-switch matching the provisioned details joins the VSF, it is provided this configuration. A new or missing VSF member can be configured as a provisioned device by using this command.

Parameters

<MEMBER-ID >

The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to 2.

<TYPE>

Configure the family of the VSF member-switch being provisioned.

<MAC-ADDR >

Configure the MAC address of the VSF member switch being provisioned.

Restrictions

  • If switch "N" physically exists, the command will fail.

  • If switch "N" is provisioned, the command can be used to change the MAC or type.

  • If the J-Number is known to not support stacking, or the J-Number is unknown, the command will fail.

  • If the same MAC address is already provisioned or exists on another member ID, the command will fail.

Usage

  • vsf member <2> type <J9850A> mac <001122-334455>

    Updates the strict provisioning for VSF member 2, and changes the MAC address to 001122-334455.

  • vsf member <2> type <J9850A>

    Changes the "strict" provisioning for VSF member 2 to "loose" provisioning. The configured MAC address is then removed.

  • vsf member <2> type <J9850A> mac <00aabb-cceedd>

    Changes "loose" provisioning for VSF member 2 to "strict" provisioning with MAC address 00aabb-cceedd.