Provisioned configuration mode procedure

The following procedure configures devices into VSF members:

  1. Configure VSF memberID and VSF links on one switch and enable VSF on that switch.
  2. After reboot, the device will come up as standalone VSF commander. Provision the second device with its memberID, J-Number, and, optionally, the MAC address.
  3. Provision the module with its J-Number. Then, provision VSF link and ports on that module.
  4. Connect the new device (with the factory default configuration) to this VSF device. The new device should be connected to the configured VSF ports.
  5. The new device will reboot and join as standby.