power-over-ethernet vsf-member

Syntax

[no] power-over-ethernet vsf member <MEMBER-ID> pre-std-detect [slot <SLOT-LIST>] [ports <PORT-LIST>]

Description

Set Power Over Ethernet (PoE) configuration parameters. Pre-standard detection and redundancy can be configured only at a per-member level when VSF is enabled.

Parameters

<MEMBER-ID>

The VSF member-ID for the 'member' command/parameter. Member ID value can be in the range from 1 to 2.

SLOT-ID-RANGE

Alphabetic device slot identifier or slot range.

<PORT-LIST>

Ethernet port number, a list of ethernet ports or 'all' for all ports.

<SLOT-ID-RANGE>

Enter an alphabetic device slot identifier or slot range preceded with the VSF member-ID [VSF-MEMBER/SLOT].

n+1

One of the highest power supplies will be held inreserve. In the event of a simple power supply failure,no powered devices will be shut down.

full

Half of the available power supplies will be held on reserve.

<THRESHOLD-LEVEL>

Threshold level in the range from 1 to 99.

Usage

power-over-ethernet vsf member <MEMBER-ID> redundancy [n+1 | full]

[no] power-over-ethernet vsf member <MEMBER-ID> redundancy [n+1 | full]

power-over-ethernet vsf member <MEMBER-ID> slot <SLOT-ID-RANGE> threshold <THRESHOLD-LEVEL>