show oobm ip

Syntax

show oobm ip [vsf member <MEMBER-ID>]

Description

Show OOBM IP for specific members in VSF

Parameters

<MEMBER-ID>

The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to 2.

show oobm ip

Switch# show oobm ip

IPv4 Status    : Enabled
IPv4 Default Gateway : 120.93.49.1

            |                                     Address  Interface
 VSF-member | IP Config IP Address/Prefix Length  Status   Status
 ---------- + --------- ------------------------- -------- ---------
 Global     | dhcp      120.93.49.9/24            Active   Up
 1          | dhcp      120.93.49.9/24            Active   Up
 2          | disabled                            Inactive Down

show oobm ip vsf member 1

Switch# show oobm ip vsf member 1
 IPv4 Status    : Enabled 
  IPv4 Default Gateway : 15.212.178.1 
            |                                     Address  Interface
 VSF-member | IP Config IP Address/Prefix Length  Status   Status   
 ---------- + --------- ------------------------- -------- ---------
 1          | dhcp      15.212.178.244/24         Active   Up       

show oobm ip vsf member 1,2

Switch(config)# show oobm ip vsf member 1,2
IPv4 Status : Enabled
IPv4 Default Gateway :                               
            |                                     Address  Interface
 VSF-member | IP Config IP Address/Prefix Length  Status   Status   
 ---------- + --------- ------------------------- -------- ---------
 1          | dhcp                                Active   Down       

Switch(config)# sho oobm ip detail
Internet (IP) Service for OOBM Interface
Global Configuration
IPv4 Status : Enabled
IPv6 Status : Disabled
IPv4 Default Gateway :
IPv6 Default Gateway :




Origin | IP Address/Prefix Length Status
----------------------------------------
dhcp   |

VIPv4 SF Member 1
Status : Enabled
IPv6 Status : Disabled
IPv4 Default Gateway :
IPv6 Default Gateway :

Origin | IP Address/Prefix Length Status
----------------------------------------
dhcp   |