show interfaces

Syntax

show interfaces [brief | config | <PORT-LIST>]

Description

Shows interface information for ports or trunk groups in brief or configuration detail.

Command context

operator or manager

Parameters

brief

Shows the current operating status for all ports or trunk groups on the switch in brief detail.

config

Shows the configuration data for all ports or trunk groups on the switch.

<PORT-LIST>

Specifies the list of ports for which status information will be shown.

<TRUNK-GROUP>

Specifies the trunk group for which status information will be shown. The status information shown consists of total transmit and receive counters and weighted average rate for the trunk group specified. The weighted average rate is calculated in 5 minute intervals.

Usage

Both external and internal ports are supported on the same module. Internal ports have an “I” suffix in the output of the show command to indicate that they are internal ports.
  • “10GbE-INT” – Internal 10G data-plane ports (1i-2i, 4i-5i)

  • “1GbE-INT” – Internal 1G control-plane port (3i)

  • Port 3i always shows as link-down.

Examples

Show brief information and status of all interfaces.

switch# show interfaces brief

Status and Counters - Port Status
                | Intrusion                            MDI   Flow  Bcast
Port  Type      | Alert     Enabled Status Mode        Mode  Ctrl  Limit
----- --------- + --------- ------- ------ ----------  ----- ----- ------
B1    100/1000T | No        Yes     Down   Auto-10-100 Auto  off   0
B2    100/1000T | No        Yes     Down   1000FDx     Auto  off   0
B3    100/1000T | No        Yes     Down   1000FDx     Auto  off   0
B4    100/1000T | No        Yes     Down   1000FDx     Auto  off   0
B5    100/1000T | No        Yes     Down   1000FDx     Auto  off   0
B6    100/1000T | No        Yes     Down   1000FDx     Auto  off   0

Show the configuration of the interfaces currently available.

switch# show interfaces config

Port Settings
  Port  Type      | Enabled Mode         Flow Ctrl MDI
  ----- --------- + ------- ------------ --------- ----
  B1    100/1000T | Yes     Auto-10-100  Disable   Auto
  B2    100/1000T | Yes     Auto         Disable   Auto
  B3    100/1000T | Yes     Auto         Disable   Auto
  B4    100/1000T | Yes     Auto         Disable   Auto
  B5    100/1000T | Yes     Auto         Disable   Auto
  B6    100/1000T | Yes     Auto         Disable   Auto 

Show brief information and status of interfaces for ports D1i, D2i, and D3i.

switch# show interfaces brief d1i-d3i

Status and Counters - Port Status
                  | Intrusion                           MDI  Flow Bcast
Port   Type       | Alert     Enabled Status Mode       Mode Ctrl Limit
------ ---------- + --------- ------- ------ ---------- ---- ---- -----
D1i    10GbE-INT  | No        Yes     Up     10GigFD    NA   off  0
D2i    10GbE-INT  | No        Yes     Up     10GigFD    NA   off  0
D3i    1GbE-INT   | No        Yes     Down   1000FDx    NA   off  0

Show the brief information and status of interfaces for ports B1 through internal port B3i.

switch# show interfaces brief b1-b3i

Status and Counters - Port Status
                   | Intrusion                           MDI  Flow Bcast
 Port   Type       | Alert     Enabled Status Mode       Mode Ctrl Limit 
 ------ ---------- + --------- ------- ------ ---------- ---- ---- -----
 B1     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B2     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B3     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B4     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B5     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B6     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B7     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B8     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B9     100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B10    100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B11    100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B12    100/1000T  | No        Yes     Down   1000FDx    Auto off  0
 B1i    10GbE-INT  | No        Yes     Up     10GigFD    NA   off  0
 B2i    10GbE-INT  | No        Yes     Up     10GigFD    NA   off  0
 B3i    1GbE-INT   | No        Yes     Up     1000FDx    NA   off  0

Show detailed interface information for port trunk 1.

switch# show interface trk1

Status and Counters - Port Counters for port Trk1                      
  Name  :  Trk1
  MAC Address      : 3464a9-b1b8bf 
  Link Status      : Up 
  Totals (Since boot or last clear) : 
   Bytes Rx        : 777,713,956          Bytes Tx        : 596,853,141   
   Unicast Rx      : 1,154,693            Unicast Tx      : 0             
   Bcast/Mcast Rx  : 48,563               Bcast/Mcast Tx  : 607,474,910   
  Errors (Since boot or last clear) : 
   FCS Rx          : 0                    Drops Tx        : 0             
   Alignment Rx    : 0                    Collisions Tx   : 0             
   Runts Rx        : 0                    Late Colln      : 0             
   Giants Rx       : 0                    Excessive Colln : 0             
   Total Rx Errors : 0                    Deferred Tx     : 0               
  Others (Since boot or last clear) : 
   Discard Rx      : 0                    Out Queue Len   : 0             
   Unknown Protos  : 0                  
  Rates (5 minute weighted average) :
   Total Rx(Kbps)  : 76,800                 Total Tx(Kbps): 76,800              
   Unicast Rx (Pkts/sec) : 21             Unicast Tx (Pkts/sec) : 0            
   B/Mcast Rx (Pkts/sec) : 114,878        B/Mcast Tx (Pkts/sec) : 114,900      
   Utilization Rx  : 00.76 %		  										Utilization Tx  : 00.76 %