Static ACLs

Static ACLs are configured on the switch. To apply a static ACL, you must assign it to an interface (VLAN or port). The switch supports three static ACL applications:

• Routed IPv4 Traffic ACL (RACL)

An RACL is an ACL configured on a VLAN to filter routed traffic entering or leaving the switch on that interface, as well as traffic having a destination on the switch itself. (Except for filtering traffic to an address on the switch itself, RACLs can operate only while IPv4 routing is enabled.

• VLAN ACL (VACL)

A VACL is an ACL configured on a VLAN to filter traffic entering the switch on that VLAN interface and having a destination on the same VLAN.

• Static port ACL

A static port ACL is an ACL configured on a port to filter traffic entering the switch on that port, regardless of whether the traffic is routed, switched, or addressed to a destination on the switch itself.