vsf member remove

This command removes the entire configuration for a specified member. After issuing the command, the specified member-ID is available for reuse and may be provisioned or assigned to another device.

If the member physically exists, its configuration will be erased. It will then be powered down by default.

Syntax

vsf member <MEMBER-ID> remove

Description

Erase the VSF virtual chassis member configuration.

Parameters

<MEMBER-ID>

The VSF member-ID for the member command/ or parameter. Member ID value can be in the range of 1 to 8.

Restriction

Remove will not be available until VSF is enabled.