dhcpv6–snooping max-bindings

Syntax

no dhcpv6-snooping max-bindings <PORT-LIST 1-8192>

Description

Configure the maximum number of binding addresses allowed per binding anchor. A binding anchor is a unique attribute that can be associated with a client address.

Parameters and options

max-bindings

Configuring maximum number of binding addresses allowed per port.

  • If the max-bindings value is configured before enabling dhcpv6-snooping the limit is immediately applied and the bindings are not allowed to exceed the max-bindings value.

  • The max-bindings value is setafter enabling dhcpv6-snooping.

  • The current bindings are greater than the max-binding value, the configuration will be applied as and when clients release their IPv6 addresses.

  • Current bindings are lesser than that of the value entered, the configuration will be immediately applied.

<PORT-LIST 1-8192>

Specify the ports on which max-bindings need to be applied in the range of 1–8192.

IMPORTANT:

DT trunks can use jumbo VLAN as usual, but user needs to ensure that jumbo is configured on both the DT pairs, otherwise packet drops/fragmentations can be seen.