device-profile name

Syntax

device-profile name <PROFILE-NAME> [untagged-vlan <VLAN-ID> |
                           tagged-vlan <VLAN-LIST> | cos <COS-VALUE> |
                           ingress-bandwidth <Percentage> |
                           egress-bandwidth <Percentage> |
                           {poe-priority {critical | high | low} |
                           speed-duplex {auto |auto-10 | auto-100 | ...} |
                           poe-max-power <Watts> |
                           allow-jumbo-frames | allow-tunneled-node]
no device-profile name <PROFILE-NAME> [untagged-vlan <VLAN-ID> |
                           tagged-vlan <VLAN-LIST> | cos <COS-VALUE> |
                           ingress-bandwidth <Percentage> |
                           egress-bandwidth <Percentage> |
                           {poe-priority {critical | high | low} |
                           speed-duplex {auto |auto-10 | auto-100 | ...} |
                           poe-max-power <Watts> |
                           allow-jumbo-frames | allow-tunneled-node]

Description

This command is used to create a user-defined profile. A profile is a named collection of port settings applied as a group. You can modify the default profile, default-ap-profile, but you cannot delete it. You can create four additional profiles.

The no form of the command removes the user-defined profiles.

The default-ap-profile has the following values:
  • untagged-vlan: 1
  • tagged-vlan: None
  • ingress-bandwidth: 100
  • egress-bandwidth: 100
  • cos: 0
  • speed-duplex: auto
  • poe-max-power: class/LLDP
  • poe-priority: critical

You can modify these parameters. For example, you can execute no untagged-vlan to create a device profile with tagged only ports.

Parameters

name

Specifies the name of the profile to be configured. The profile names can be at most 32 characters long.

cos

The Class of Service (CoS) priority for traffic from the device.

untagged-vlan

The port is an untagged member of specified VLAN.

tagged-vlan

The port is a tagged member of the specified VLANs.

allow-tunneled node

Configuration to allow Tunneled Node when device profile is applied on port.

ingress-bandwidth

The ingress maximum bandwidth for the device port.

egress-bandwidth

The egress maximum bandwidth for the device port.

poe-priority

The PoE priority for the device port.

speed-duplex

The speed and duplex for the device port.

poe-max-power

The maximum PoE power for the device port. The value is set based on PD Class detection and/or LLDP negotiation. poe-max-power will have class appropriate value depending on the class of your AP. (Example: class4 = 25.5W, class 3=13W, class2=6.49W, class1=3.84W, class0=13W)

Restrictions

  • You can modify the configuration parameters of the default profile, default-ap-profile, but you cannot delete it or change its name.

  • Egress rate limiting is not supported for devices running on Aruba 2930F Switch Series.

  • The profile configuration is only applicable to access points.