Reserved VLAN

Syntax
tunneled-node-server mode role-based reserved-vlan <VLAN-ID>

no tunneled-node-server mode role-based reserved-vlan <VLAN-ID>
Description

Enable tunneled node server with a reserved VLAN on which all client traffic is sent to the controller.

Example

To configure a tunneled node server in role-based reserved VLAN mode:

switch(tunneled-node-server)# mode
port-based        Configure tunneled node server mode as port based.
role-based        Configure tunneled node server mode as role based.

switch(tunneled-node-server)# mode role-based
reserved-vlan	Configure VLAN Mode as No-VLAN, switch without tunneled-node client’s vlan.

switch(tunneled-node-server)# mode role-based reserved-vlan
VLAN-ID	          Configure VLAN to be created and reserved for tunneled-node clients.
   							

switch(tunneled-node-server)# mode role-based reserved-vlan <VLAN-ID>

show tunneled-node-server output:

switch(config)# show tunneled-node-server
 Tunneled Node Server Information
  State                                              : Enabled
  Primary Controller                                 : 10.0.0.1
  Backup Controller                                  : 
  Keepalive Interval (seconds)                       : 8
  Mode                                               : Role-based
  Vlan-Mode                                          : no-vlan/vlan-extend
  Reserved-VLAN	                                     : reserved-VID/0

switch(config)# show vlan <reserved-vid>
VLAN ID    Name               | Status           | Voice    | Jumbo
--------------------------------------------------------------------
<VID>      PUTN-ReservedVLAN  | Port-based       | No       | No