`radius-server dead-time`

Syntax

radius-server dead-time [infinite | minutes]

Description

Enables the RADIUS Server dead-time to a specific time (minutes) or to infinity.

Restrictions

If radius tracking is enabled, only infinite is allowed for dead-time. For example, the command (config)# radius-server dead-time 120 returns an error message Dead-time value can't be configured when RADIUS service tracking feature is enabled. RADIUS tracking must be configured to track infinitely unavailable RADIUS server.

Command context

manager

Parameters

INFINITE: Selects infinite dead time.
MINUTES: Specifies the dead time value in minutes. Length: 1 mins to 1440 mins.

Examples

Use the show radius command to display dead time.

show radius              

 Status and Counters - General RADIUS Information
*
Server once reachable will be not be considered alive
  Deadtime (minutes)             : Infinite
  Timeout (seconds)              : 5
  Retransmit Attempts            : 3
  Global Encryption Key          :

  Dynamic Authorization UDP Port : 3799
  Source IP Selection            : Outgoing Interface
  Tracking                       : Enabled
  CPPM Identity                  :

                  Auth  Acct  DM/ Time   |
  Server IP Addr  Port  Port  CoA Window | Encryption Key  |   OOBM
  --------- ---- ------ ----- --- ------ + ---------------- --------