tunneled-node-server

Syntax

tunneled-node-server [controller-ip <IP-ADDR|IPv6-ADDR> | backup-controller-ip 
<IP-ADDR|IPv6-ADDR> | [keepalive <TIMEOUT>] | enable | mode role-based {reserved-vlan <VLAN-ID>}]
    
no tunneled-node-server [controller-ip <IP-ADDR|IPv6-ADDR> | backup-controller-ip 
<IP-ADDR|IPv6-ADDR> | [keepalive <TIMEOUT>] | enable | mode role-based {reserved-vlan <VLAN-ID>}]

Description

Configure tunneled node server information.

The no form of the command removes the tunneled node server configuration.

Parameters

controller-IP

Configure the controller IP address for the tunneled node. Both IPv4 and iPv6 are supported.

backup-controller-IP

Configure the backup controller IP address for the tunneled node. Both IPv4 and IPv6 are supported.

keepalive

Configure the keepalive timeout for the tunneled node in seconds [1-40]. The default is 8 seconds.

enable

Enter the manager command context.

mode role-based

Specifies the tunneled node server mode as role based.

mode role-based reserved-vlan

Specifies the VLAN used as tunneled node server reserved VLAN.

Examples

switch(config)# tunneled-node-server controller-ip 15.255.133.148
switch(config)# tunneled-node-server backup-controller-ip 15.255.133.148
switch(config)# tunneled-node-server keepalive 40