Configuring an OOBM IPv4 address

Configuring an IPv4 address for the OOBM interface is similar to VLAN IP address configuration, but it is accomplished within the OOBM context.

From the OOBM context:

Syntax:


no ip address [dhcp-bootp|ip-address/mask-length]

From the general configuration context:

Syntax:


no oobm ip address [dhcp-bootp|ip-address/mask-length]

Configures an IPv4 address for the switch's OOBM interface.

You can configure an IPv4 address even when global OOBM is disabled; that address will become effective when OOBM is enabled.

Example:

Switch (oobm)# ip address 10.1.1.17/24