Configuring (enabling or disabling) the TimeP mode

Enabling the TimeP mode means to configure it for either broadcast or unicast mode. Remember to run TimeP as the switch's time synchronization protocol, you must also select TimeP as the time synchronization method by using the CLI timesync command.

Syntax:


timesync timep

Selects TimeP as the time synchronization method.

Syntax:


ip timep {<dhcp | manual>}

Enables the selected TimeP mode.

Syntax:


no ip timep

Disables the TimeP mode.

Syntax:


no timesync

Disables the time protocol.