show ospf3 link-state link-scope information

The commands in this section enable display of the routing-switch's OSPFv3 link-state link-scope database, with options for narrowing the scope of the output and increasing the range of settings included in the output.

Syntax

show ipv6 ospf3 link-state link-scope interface vlan-id lsid lsid-# router-id rtr-id-#[detail|advertise]

Description

Displays link-state link-scope database for all links configured on the routing switch. The range of displayed data can be reduced by using one or more subset options:

Options

interface vlan-id

Subset option to filter displayed LSA database or advertisements to show only the link-scope data from a specific VLAN.

Can also be filtered with other subset options (lsid and router-id) to further define the source of displayed information.

lsid lsid-#

Subset option to filter displayed LSA database or advertisements to show only the link-scope data having the specified (32-bit) IP address as a link-state ID.

Can also be filtered with other subset options (router-id and interface) to further define the source of displayed information.

router-id rtr-id-#

Subset option to filter displayed LSA database or advertisements to show only the link-scope data having the specified router-ID.

Can also be filtered with other subset options (lsid and interface) to further define the source of displayed information.

detail

Displays additional details for each LSA included in the range of displayed LSAs for any of the above options.

advertise

Displays the hexadecimal data in LSA packets (advertisements) within the OSPFv3 link scope on the routing switch.

The output can also be filtered by lsid and router-id.

Example output

To display link-scope link-state information, enter show ipv6 ospf3 link-state link-scope at any CLI level. When you enter this command, an output similar to the following is displayed:

Switch# show ipv6 ospf3 link-state link-scope

 OSPFv3 Link Scope Link State Database for LS index 599

           Advertising
  LSA Type Router ID    Link State ID Age Sequence # Checksum
  -------- ------------ ------------- --- ---------- ----------
  Link     1.1.1.1      599           842 0x80000009 0x0000fb93
  Link     15.255.155.1 599           903 0x80000009 0x00006185
  Link     1.0.0.4      632           845 0x80000009 0x00002a0c
  Link     15.255.155.1 632           874 0x80000009 0x0000662a

Link-State Link-Scope Output for a Specific Tunnel


Switch(config)# show ipv6 ospf3 link-state link-scope interface tunnel 3

 OSPFv3 Link Scope Link State Database for LS index for Tunnel 3

           Advertising
  LSA Type Router ID   Link State ID Age Sequence # Checksum
  -------- ----------- ------------- --- ---------- ----------
  Link     1.1.1.1     578           106 0x80000004 0x0000583b
  Link     2.2.2.2     578           114 0x80000004 0x000065d5

To display link-scope LSA advertisements in hexadecimal format, use the advertise keyword:

show ipv6 ospf3 link-state link-scope advertise output

Switch# show ipv6 ospf3 link-state link-scope advertise

OSPFv3 Link Scope Link State Database for LS index 599

Raw Advertisements
-----------------------------------------------------------------------
11a00008000002570101010180000009fb93003801000013fe800000000000000000000
0022000100000001400000002620000b00000000

11630008000002570fff9b01800000096185003801000013fe800000000000000000000
0022000200000001400000002620000b00000000

119e00080000027801000004800000092a0c003801000013fe800000000000000000000
0055000200000001400000002620000e00000000

11810008000002780fff9b0180000009662a003801000013fe800000000000000000000
0055000100000001400000002620000e00000000