show ipv6 ospf3 interface

Syntax

show ipv6 ospf3 interface [vlan vid|tunnel tunnel-id|loopback lo-id][ detail ]

Description

Displays basic OSPFv3 information related to the VLANs configured on the routing switch.

Options

vlan-id

Displays information for a specific VLAN.

tunnel tunnel-id

Displays information for a specific tunnel.

loopback lo-id

Displays information for a loopback interface.

detail

Displays additional, VLAN-specific OSPFv3 information.

Example output

This example shows the show ipv6 ospf3 interface command output:

Switch# show ipv6 ospf3 interface

 OSPFv3 configuration and statistics for interfaces

 Interface    Status   Area ID      State   Cost   Pri   Passive
 ------------ -------- ------------ ------- ------ ----- -------
 vlan-55      Enabled  0.0.0.1      BDR     1      1     No
 vlan-75      Enabled  0.0.0.3      BDR     1      1     No
 tunnel-3     Enabled  0.0.0.0      Down    1      1     No

This example shows the show ipv6 ospf3 interface tunnel command output:

Switch(config)# show ipv6 ospf3 interface tunnel 3

 OSPFv3 configuration and statistics for Tunnel 3

 Interface    Status   Area ID      State  Cost   Pri   Passive
 ------------ -------- ------------ ------ ------ ----- -------
 tunnel-3     Enabled  1.2.3.4      DOWN   1      1     No

This example shows the show ipv6 ospf3 interface detail command output:

Switch(config)# show ipv6 ospf3 interface detail

 OSPFv3 configuration and statistics for VLAN 22

  Interface       : vlan-22   Status                    : Enabled
  Area ID         : 1.2.3.4   State                     : DOWN
  Priority        : 1         Cost                      : 1
  Type            : BCAST     Passive                   : No
  Hello Interval  : 10        Dead Interval             : 890
  Transit Delay   : 1         Retransmit Interval       : 5
  Events          : 0         Designated Router         : 0.0.0.0
  Neighbors       : 0         Backup Designated Router  : 0.0.0.0

 OSPFv3 configuration and statistics for Tunnel 3

  Interface       : tunnel-3  Status                    : Enabled
  Area ID         : 0.0.0.0   State                     : DOWN
  Priority        : 1         Cost                      : 1
  Type            : P2P       Passive                   : No
  Hello Interval  : 10        Dead Interval             : 50
  Transit Delay   : 1         Retransmit Interval       : 5
  Events          : 0         Designated Router         : 0.0.0.0
  Neighbors       : 0         Backup Designated Router  : 0.0.0.0

 OSPFv3 configuration and statistics for Loopback 1

  Interface       : lo-1      Status                    : Enabled
  Area ID         : 1.2.3.4   State                     : DOWN
  Priority        : n/a       Cost                      : 1
  Type            : BCAST     Passive                   : n/a
  Hello Interval  : 10        Dead Interval             : 50
  Transit Delay   : n/a       Retransmit Interval       : n/a
  Events          : 0         Designated Router         : n/a
  Neighbors       : n/a       Backup Designated Router  : n/a

Detail Option for a VLAN

Switch# show ipv6 ospf3 interface vlan 55 detail

 OSPFv3 configuration and statistics for VLAN 55

  Interface       : vlan-55    Status                    : Enabled
  Area ID         : 0.0.0.1    State                     : BDR
  Priority        : 1          Cost                      : 1
  Type            : BCAST      Passive                   : No
  Hello Interval  : 10         Dead Interval             : 40
  Transit Delay   : 1          Retransmit Interval       : 5
  Events          : 0          Designated Router         : 10.0.0.1
  Neighbors       : 1          Backup Designated Router  : 10.0.1.4