Create a smart link group

Syntax


no smart link group group-id

Create a smart link group. When command is entered without any parameter, it enters into smart link group context.

master port

Assign master port.

slave port

Assign slave port.

protected-vlans vid-list

Assign protected VLANs.

send-control-vlan vid

Assign the VLAN to send flush packets.

preemption-mode off

Specify the preemption mode. (Default is off.)

preemption-delay 10-max

Set the delay until when standby preempts active. (Default is 1 second.)

trap enable | disable

Enable sending trap for this group.

Disable the trap for this group

NOTE:

The maximum number of Smartlink Groups supported is 24.