Viewing the port operation mode

An asterisk beside the Mode value indicates that the speed has been dynamically overridden by the RADIUS HP-Port-Speed VSA.

Output displaying mode values that are overridden by RADIUS HP-Port-Speed VSA

switch(config)# show int brief

 Status and Counters - Port Status

                   | Intrusion                           MDI  Flow Bcast
  Port   Type      | Alert     Enabled Status Mode       Mode Ctrl Limit
  ------ --------- + --------- ------- ------ ---------- ---- ---- -----
  1      10/100TX  | No        Yes     Up     10FDx*     MDI  off  0
  2      10/100TX  | No        Yes     Down   100FDx     Auto off  0
  3      10/100TX  | No        Yes     Down   100FDx     Auto off  0
  4      10/100TX  | No        Yes     Down   100FDx     Auto off  0
  5      10/100TX  | No        Yes     Down   10FDx      Auto off  0
  6      10/100TX  | No        Yes     Down   10FDx      Auto off  0
  7      10/100TX  | No        Yes     Down   10FDx      Auto off  0
  8      10/100TX  | No        Yes     Down   10FDx      Auto off  0
 .
 .
 .

Output displaying the ports that have the HP-Port-Speed VSA enabled

switch(config)# show port-access config

 Port Access Status Summary

  Port-access authenticator activated [No] : No
  Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No

       Supplicant Authenticator Web Auth Mac Auth Speed VSA
  Port Enabled    Enabled       Enabled  Enabled  Enabled
  ---- ---------- ------------- -------- -------- ---------
  1    No         No            No       No       Yes
  2    No         No            No       No       No
  3    No         No            No       No       No
  4    No         No            No       No       No
  5    No         No            No       No       No
  6    No         No            No       No       No
  7    No         No            No       No       No
  8    No         No            No       No       No
  .
  .
  .

Output displaying the port speed

switch(config)# show port-access web-based clients 1 detailed

 Port Access Web-Based Client Status Detailed

  Client Base Details :

  Port : 1

  Session Status : authenticated Session Time(sec) : 6

  Username : webuser1 MAC Address : 0010b5-891a9e IP : n/a

  Access Policy Details :
  COS Map : 11111111 In Limit % : 98
  Untagged VLAN Tagged VLANs : 1, 3, 5, 6, 334, 2566
  Port Speed: 10HDX
RADIUS-ACL List :
   deny in udp from any to 10.2.8.233 CNT
 .
 .
 .

Output displaying the port speed

switch(config)# show running-config

Running configuration:

; J9470A Configuration Editor; Created on release #XX.15.13.0000x
; Ver #04:2f.ff.3f.ef:04
hostname "Switch-xxxx-xx"
module 1 type j94dda
ip route 207.95.7.0 255.255.255.0 207.95.6.157 name "Redroute"
snmp-server community "public" unrestricted
snmp-server host 15.255.133.156 community "public"
aaa port-access 1 port-speed-vsa
vlan 1
  name “DEFAULT_VLAN”
 .
 .
 .