Stacking Events

The following are the events related to Stacking.

Event ID: 399

Message
Stack Protocol enabled
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description This log event informs the user that Stack Protocol is enabled on the Switch.

Event ID: 400

Message
Stack Protocol disabled
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description This log event informs the user that Stack Protocol is disabled on the Switch.

Event ID: 401

Message
A generic message descriptor. Used for logging debug messages
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Debug
Description A generic message descriptor used for logging debug messages.

Event ID: 537

Message
Syncing <primary|secondary> to <standby|member N>
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description Logged when OS file sync to standby|member starts|ends.

Event ID: 538

Message
Standby <BOOT IMAGE> updated- rebooting standby
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description Logged when standby's boot image or default boot selection. was overwritten; necessitating a reboot.

Event ID: 539

Message
Initial sync to <ACTIVE|STANDBY to STANDBY|MEMBER N> <STARTED/COMPLETED>
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description Start|end of initial synchronization of active's CF to standby.

Event ID: 540

Message
Redundant Standby Management Module syncing is <INPROGRESS|COMPLETED>. Configuration changes are <TEMPORARILY DISABLED| ENABLED>
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description This message displays when the changes to configuration is disabled or. enabled; when the redundant standby management module syncing start or complete.

Event ID: 541

Message
Out of storage space on <SYSTEM: PARTITION>
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Information
Description This message displays when the module disk is full and file sync. is not possible

Event ID: 3250

Message
Received stacking packet with incompatible version
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that we got a packet with a diff proto ver

Event ID: 3251 (Severity: Warning)

Message
Stack port cable looped back between ports <REMOTE_PORT> and <STACK_PORT>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that the stack cable is looped back to. the same switch

Event ID: 3252

Message
Switch with stack ID <STACK_ID> cannot join stack due mismatch stack ID
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that the stack cable is looped back to. the same switch

Event ID: 3253 (Severity: Warning)

Message
Maximum number of switches in the stack has been reached. Cannot add <STACK_ID> type <PRODUCT_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that we would exceed the MAX. switches if we add this new switch

Event ID: 3257 (Severity: Warning)

Message
Reboot of <STACK_ID> <PRODUCT_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates the status of a reboot request

Event ID: 3258 (Severity: Warning)

Message
<SWITCH TYPE> switch with Member ID <MEMBER_ID> removed due to <MESSAGE STR>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates the status of a reboot request

Event ID: 3259 (Severity: Warning)

Message
The switch software version doesn't match the version on the stack commander- waiting for reboot
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that stack member has incorrect SW version and has to reboot

Event ID: 3260

Message
Member booted
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that member is booted

Event ID: 3261

Message
Member active
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that member is active

Event ID: 3262

Message
Member failed because synchronization failed
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that member is failed synchronization

Event ID: 3263 (Severity: Warning)

Message
Member went down: <MEMBER_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that member is crashed

Event ID: 3264 (Severity: Fatal)

Message
Crash info: <CRASH_STR>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Fatal
Description This log event indicates that reason of the crash

Event ID: 3265

Message
Lost Communication with Member <MEMBER_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that communication lost with member

Event ID: 3266

Message
Resetting member
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that member is reseting

Event ID: 3267

Message
Failover occurred
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that failover occurred

Event ID: 3268

Message
User initiated switchover occurred
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that switchover occurred

Event ID: 3269

Message
Shutting down Member
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates that member is being shut down

Event ID: 3270 (Severity: Warning)

Message
Topology is a <TYPE: STANDALONE|RING|CHAIN|MESH|PARTIAL MESH>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that a non supported topology exits

Event ID: 3271

Message
Topology is a <TYPE: STANDALONE|RING|CHAIN|MESH|PARTIAL MESH>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates the current topology

Event ID: 3272

Message
Stack <FRAGMENT> <ACTIVE/INACTIVE>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event indicates stack state.

Event ID: 3273 (Severity: Warning)

Message
Member <MEMBER_ID> with mac <MAC_ADDRESS> was deleted so missing member could be added
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that a stacking member was deleted from. config to make room for a missing member

Event ID: 3274 (Severity: Warning)

Message
Member<MEMBER_ID> with mac <MAC_ADDRESS> was replaced so missing member could be added
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that a stacking member in config was updated with a new mac so we could add a missing member

Event ID: 3275 (Severity: Warning)

Message
<TYPE: UNKNOWN|COMMANDER|STANDBY|MEMBER|PROVISIONED> switch with Member ID <MEMBER_ID> removed due to user request
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates the member has been removed due to user request

Event ID: 3276 (Severity: Warning)

Message
<TYPE: UNKNOWN|COMMANDER|STANDBY|MEMBER|PROVISIONED> switch with Member ID <MEMBER_ID> removed
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates the member has been removed.

Event ID: 3277 (Severity: Warning)

Message
Member <MEMBER_ID> <STACK_ID> cannot join stack due to incorrect product id: <PRODUCT_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates the member was not allowed to join due to. a mismatched product-id (j-number)

Event ID: 3278

Message
Member <MEMBER_ID> <STACK_ID> elected as commander. Reason: <REASON_STR>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event provides the reason this switch won the commander. election

Event ID: 3279

Message
Member <MEMBER_ID> <STACK_ID> chosen as standby. Reason: <REASON_STR>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Information
Description This log event provides the reason this switch won the standby. election

Event ID: 3280 (Severity: Fatal)

Message
Ignoring Member <MAC_ADDRESS> <PRODUCT_ID_MESSAGE>: unsupported topology.
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Fatal
Description This log event indicates that a unsupported topology exists

Event ID: 3281 (Severity: Warning)

Message
Merge of member <MEMBER_ID> with mac <MAC_ADDRESS> blocked due to mismatch in config.
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description This log event indicates that a fragment couldn't merge to an another active fragement due to mismatch in config

Event ID: 3282 (Severity: Warning)

Message
Found switch <MAC_ADDRESS> running an older version of the stacking protocol. Upgrade the switch to the same version as the commander or greater to join the stack.
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning

Event ID: 3283 (Severity: Warning)

Message
Found Unsupported switch with mac <MAC_ADDRESS> and Product type <PRODUCT_ID> Connected to switch with mac <MAC_ADDRESS> on stack port <PORT_ID>
Platforms KA, KB, WB, WC, YC
Category Stacking
Severity Warning
Description Found Unsupported switch with mac <MAC_ADDRESS> and Product type <PRODUCT_ID> Connected to switch with mac <MAC_ADDRESS> on stack port <PORT ID>

Event ID: 3284

Message
Member <MEMBER_ID> cannot be removed/shutdown as it does not exist or is not provisioned.
Platforms KB, WB, WC, YC
Category Stacking
Severity Information
Description Event indicates that stacking member is not removed or shutdown as it does not exist or is not provisioned.

Event ID: 3285

Message
Member <MEMBER_ID> cannot be removed/shutdown as it would result in a stack split.
Platforms KB, WB, WC, YC
Category Stacking
Severity Information
Description Event indicates that stacking member is not removed or shutdown as it will result in stack split.

Event ID: 3286

Message
Member <MEMBER_ID> cannot be removed/shutdown as standby sync is in progress.
Platforms KB, WB, WC, YC
Category Stacking
Severity Information
Description Event indicates that stacking member is not removed or shutdown as standby sync is in progress.

Event ID: 3287

Message
The commander cannot be shut down. Please switchover to the standby first.
Platforms KB, WB, WC, YC
Category Stacking
Severity Information
Description Event indicates that command will not be shutdown. Switch over to standby first.

Event ID: 3381 (Severity: Warning)

Message
Stacking Port <PORT_ID> communications - self test failure ERR: <ERROR_STR>.
Platforms K, KA, KB, RA, WB, WC, YA, YB, YC
Category Stacking
Severity Warning