Overview of IP preserve
For the switches covered in this guide, IP Preserve enables you to copy a configuration file to multiple switches while retaining the individual IP address and subnet mask on VLAN 1 in each switch, and the Gateway IP address assigned to the switch. This enables you to distribute the same configuration file to multiple switches without overwriting their individual IP addresses.
To summarize the IP Preserve effect on IP addressing:
If the switch received its most recent VLAN 1 IP addressing from a DHCP/ Bootp server, it ignores the ip preserve command when it downloads the configuration file, and implements whatever IP addressing instructions are in the configuration file.
If the switch did not receive its most recent VLAN 1 IP addressing from a DHCP/Bootp server, it retains its current IP addressing when it downloads the configuration file.
The content of the downloaded configuration file determines the IP addresses and subnet masks for other VLANs.
The following examples demonstrate the operation of IP Preserve:
If you apply the following configuration file to the scenario that is shown in Example of IP Preserve operation with multiple series switches, switches 1 - 3 will retain their manually assigned IP addressing and switch 4 will be configured to acquire its IP addressing from a DHCP server.
Configuration file in TFTP server with DHCP/Bootp specified as the IP addressing source
switch(config)# show run Running configuration: ; J9091A Configuration Editor; Created on release #K.15.10.0001 hostname "switch" module 1 type J8702A module 2 type J8705A trunk A11-A12 Trk1 Trunk ip default-gateway 10.10.10.115 snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged A1-A10,A13-A24,B1-B24,Trk1 ip address dhcp-bootp exit spanning-tree Trk1 priority 4 password manager password operator
If you apply the following configuration file to the scenario that is shown in Example of IP Preserve operation with multiple series switches, switches 1 - 3 will still retain their manually assigned IP addressing. However, switch 4 will be configured with the IP addressing included in the file.
Configuration file in TFTP server with dedicated IP addressing, instead of DHCP/Bootp
switch# show run Running configuration: ; J9091A Configuration Editor; Created on release #K.15.10.0001 hostname "switch" module 1 type J8702A module 2 type J8705A trunk A11-A12 Trk1 Trunk ip default-gateway 10.10.10.115 snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged A1,A7-A10,A13-A24,B1-B24,Trk1 ip address 10.12.17.175 255.255.255.0 tagged A4-A6 no untagged A2-A3 exit vlan 2 name "VLAN2" untagged A2-A3 no ip address exit spanning-tree Trk1 priority 4 password manager password operator