Viewing DLDP configuration information and statistics
To view the DLDP statistics for the specified ports, use the command
show dldp statistics <port-list>
. The port-list argument specifies a single port, a list of ports, or a range of ports.To view the DLDP statistics for all ports, use the command
show dldp statistics all
To view the DLDP configuration information and statistics for the specified ports, use the command
show dldp <port-list>
. The port-list argument specifies a single port, a list of ports, or a range of ports.To view the DLDP configuration information and statistics for all ports, use the command
show dldp all
.
The following examples shows the DLDP statistics for port number a1.
show dldp statistics a1
Status and Counters - Device Link Detection Protocol
Port : a1
Packets Sent : 256
Packets Received : 255
Invalid Packets Received : 0
Authentication Failed Packets Received : 0
Valid Packets Received : 255
The following example shows the DLDP statistics for ports a1 through a3.
show dldp statistics a1-a3
Status and Counters - Device Link Detection Protocol
Port : a1
Packets Sent : 256
Packets Received : 255
Invalid Packets Received : 0
Authentication Failed Packets Received : 0
Valid Packets Received : 255
Port : a2
Packets Sent : 256
Packets Received : 255
Invalid Packets Received : 0
Authentication Failed Packets Received : 0
Valid Packets Received : 255
Port : a3
Packets Sent : 0
Packets Received : 0
Invalid Packets Received : 0
Authentication Failed Packets Received : 0
Valid Packets Received : 0
The following example shows the DLDP configuration information and statistics for port number a1.
show dldp a1
The output will display sensitive information. Continue (y/n)?
Status and Configuration - Device Link Detection Protocol
Global Status : Enabled
Advertisement Interval (Sec) : 5
Authentication Mode : None
Authentication Password : Password
Unidirectional Shutdown Mode : Auto
DelayDown Timer Value (Sec) : 1
Number of DLDP Enabled Ports : 2
Interface A1
DLDP Port State : Bidirectional
Number of Neighbors : 1 (Maximum number ever detected: 2)
Port Port Link Neighbor MAC Neighbor Neighbor Neighbor
State State Address Port Index Aged Time
----- --------------- -------- ------------- ------------ ------------ -------
A1 Unidirectional up 010fe2-000004 5 unconfirmed 0
The following example shows the DLDP configuration information and statistics for ports a1 through a3.
show dldp a1-a3
The output will display sensitive information. Continue (y/n)?
Status and Configuration - Device Link Detection Protocol
Global Status : Enabled
Advertisement Interval (Sec) : 5
Authentication Mode : None
Authentication Password : Password
Unidirectional Shutdown Mode : Auto
DelayDown Timer Value (Sec) : 1
Number of DLDP Enabled Ports : 2
Interface A1
DLDP Port State : Unidirectional
Number of Neighbors : 1 (Maximum number ever detected: 2)
Interface A2
DLDP Port State : Bidirectional
Number of Neighbors : 1 (Maximum number ever detected: 2)
Interface A3
DLDP Disabled
Port Port Link Neighbor MAC Neighbor Neighbor Neighbor
State State Address Port Index Aged Time
----- --------------- ------- ------------- ---------- ------------ --------
A1 Unidirectional up 40a8f0-9e2100 2 unconfirmed 0
A2 Bidirectional down 010fe2-000004 3 unconfirmed 0