show interfaces custom

Syntax

show interfaces custom <PORT-LIST> <COLUMN-LIST>
      

Description

Select the information that you want to display. Supported columns are shown in the following section.

Parameters and options

port

port identifier, such as A2.

type

Port type, such as 100/1000T

status

Port status, up or down.

speed

Connection speed and duplex, such as 1000FDX

mode

Configured mode, auto, auto-100, 100FDX

mdi

MDI mode, auto, MDIX

flow

Flow control, on or off

name

Friendly port name

vlanid

The vlan id this port belongs to, or “tagged” if it belongs to more than one vlan.

enabled

Port is or is not enabled, yes or no.

intrusion

Intrusion alert status, no.

bcast

Broadcast limit, 0

You can specify the column width by entering a colon after the column name, then indicating the number of characters to display. In Example of the custom show interfaces command, the Name column displays only the first four characters of the name. All remaining characters are truncated.

Each field has a fixed minimum width to be displayed. If you specify a field width smaller than the minimum width, the information is displayed at the minimum width. For example, if the minimum width for the Name field is 4 characters and you specify Name:2, the Name field displays 4 characters.

You can enter parameters in any order. There is a limit of 80 characters per line; if you exceed this limit an error displays.