Enabling TimeP in manual mode

Select TimeP and configure it for manual operation using a TimeP server address of 10.28.227.141, and the default poll interval (720 minutes, assuming the TimeP poll interval is already set to the default).

Procedure
  1. Select TimeP:

    switch(config)# timesync timep

  2. Activate TimeP in manual mode:

    switch(config)# ip timep manual 10.28.227.141

  3. Review the TimeP status:

    switch(config)# show timep

    show timep output 
    switch(config)# show timep
 Timep Configuration

  Time Sync Mode: Timep
  TimeP Mode :  Manual              Server Address : 10.28.227.141
  Poll Interval (min) : 720