show ipv6 route

Syntax

show ipv6 route

Description

Displays the current IPv6 routing table content for the routing switch.

Where there are multiple routes to the same destination, only the route with the lowest administrative distance is entered in the routing table and used to forward traffic to that destination.

Options

[ ipv6-destination [connected|static|ospf3]]

[ connected ipv6-destination ]

[ static ipv6-destination ]

[ ospf3 ipv6-destination ]

Usage

The complete IPv6 route table is displayed by entering the CLI command show ipv6 route from any context level in the console CLI.

Example output

Switch(config)# show ipv6 route

                       IPv6 Route Entries
Destination : ::/0
Gateway : 2001:db8:e::55:2
Type: static     Sub-Type: NA         Distance: 130 1
Metric: 1

Destination : ::1/128
Gateway : lo0
Type: connected  Sub-Type: NA         Distance: 0    Metric: 1

Destination : 2001:db8:1::127/128
Gateway : lo6
Type: connected  Sub-Type: NA         Distance: 0    Metric: 1

Destination : 2001:db8:a::/64
Gateway : fe80::22:1%vlan22
Type: ospf3      Sub-Type: InterArea 2
          
Distance: 110  Metric: 2

Destination : 2001:db8:b::/64
Gateway : VLAN22
Type: connected  Sub-Type: NA         Distance: 0 3  Metric: 1

Destination : 2001:db8:c::/64
Gateway : 2001:db8:e::55:2
Type: static     Sub-Type: NA         Distance: 120  Metric: 1

1 The Default Route configured with a Non-Default Distance

2 OSPFv3 Route, with "InterArea" Sub-Type and Default Distance

3 Static Route with Non-Default Distance