Configuring port-based and protocol-based VLAN parameters

In the factory default state, all ports on the switch belong to the port-based default VLAN (DEFAULT_VLAN; VID=1), and are in the same broadcast/multicast domain.

The default VLAN is also the Primary VLAN. You can configure up to 255 additional static VLANs by adding new VLAN names, and then assigning one or more ports to each VLAN.

The switch accepts a maximum of 2048 VLANs with VIDs numbered up to 4094. This must include the default VLAN and any dynamic VLANs the switch creates if you enable GVRP.

NOTE:

Each port can be assigned to multiple VLANs by using VLAN tagging.