Loading a local certificate

To load a local certificate (single certificate/certificate chain), execute the following command.

Syntax


(Switch_Name#)copy tftp local-certificate <ip-addr><file-name> 


(Switch_Name#)copy sftp local-certificate [user <user-name>] [<ip-addr/ipv6-addr/host-name-str>] [<username@ip-str>] <filename> [port <1-65535>]

Options

ta-certificate

Copy a Trust Anchor certificate to the device.

ta-profile-name

The Trust Anchor Profile associated with the certificate.

local certificate

Local Certificate to be copied.

ip-addr

IP address of the server.

file-name

Name of the certificate file.

ipv6–addr

Specify TFTP server IPv6 address.

host-name-str

Specify hostname of the SFTP server.

user

Specify the username on the remote system.

username@ip-str

Specify the username along with remote system information (hostname, IPv4 or IPv6 address.)

port

TCP port of the SSH server on the remote system.

NOTE:

The loaded certificate is validated against a pending Certificate Request and the maximum number of intermediate certificates allowed is 3 (with a maximum of 5 certificates in a chain). Intermediate certificates must either be loaded before the local certificate or are included as part of the local certificate.