Viewing static port (and trunk) ACL assignments

This command lists the identification and types of current static port ACL assignments to individual switch ports and trunks, as configured in the running-config file. The switch allows one static port ACL assignment per port.

Syntax 


show access-list ports <all | port-list>

Lists the current static port ACL assignments for ports and trunks in the running config file.

NOTE:

This information also appears in the show running output. If you execute write memory after configuring an ACL, it also appears in the show config output.

Example

The following output shows IPv4 and IPv6 ACLs configured on various ports and trunks on the switch:

Listing the ACL assignments for ports and trunks