aaa port-access authenticator eap-id-compliance
Syntax
aaa port-access authenticator eap-id-compliance
no aaa port-access authenticator eap-id-compliance
Description
This command enables EAP identifier compliance to support non-incremental EAP identifier values from RADIUS server, for a new EAP request . EAP Identifier compliance is disabled by default.
The
no
form of this command disables EAP identifier compliance to support non-incremental EAP identifier values from RADIUS server, for a new EAP request.
Command context
config
Examples
switch(config)# aaa port-access authenticator active Activate/deactivate 802.1X authenticator. cached-reauth-delay Set period of time, in seconds, during which authenticator will not initiate reauthentications after a cached reauthentication. eap-id-compliance Enable/disable EAP identifier compliance feature. [ethernet] PORT-LIST Manage 802.1X on the device ports. switch(config)# aaa port-access eap-id-compliance switch(config)# show port-access authenticator 1/5 Port Access Authenticator Status Port-access authenticator activated [No] : Yes Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No Use LLDP data to authenticate [No] : No Dot1X EAP Identifier Compliance [Disabled] : Enabled Auths/ Unauth Untagged Tagged % In RADIUS Cntrl Port Guests Clients VLAN VLANs Port COS Limit ACL Dir Port Mode ----- ------- ------- -------- ------ --------- ----- ------ ----- ---------- 1/5 0/0 0 22 No No No No both 1000FDx
switch(config)#show running config Running configuration: ; J9728A Configuration Editor; Created on release #WB.16.05.0011 ; Ver #14:01.10.08.15.9b.3f.b3.b8.ee.34.79.3c.29.eb.9f.fc.f3.ff.37.ef:5d hostname "switch" module 1 type j9728a snmp-server community "public" unrestricted aaa port-access authenticator 1-2 aaa port-access authenticator cached-reauth-delay 300 aaa port-access authenticator eap-id-compliance aaa port-access authenticator active oobm ip address dhcp-bootp exit vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address dhcp-bootp exit