show ip source-interface
Syntax
show ip source-interface
ipv6 source-interface {<PROTOCOL-ID | all>} {<loopback <ID> | vlan <VLAN-ID> | < IPV6-ADDR>>}}
Description
Define source IP address selection policy for the application protocols. Use 'no' form of the command to revert application protocols to the default (original) behavior, when IP address of the outgoing interface is used as the source.
Example
switch(config)# show ip source-interface detail Show detailed source IP information. radius Specify the protocol. sflow Specify the protocol. sntp Specify the protocol. status Show source IP information. syslog Specify the protocol. tacacs Specify the protocol. telnet Specify the protocol. tftp Specify the protocol. tunneled-node-server Specify the protocol.