device-fingerprinting apply

Syntax

device-fingerprinting apply policy <profile_name> <port-number>

no device-fingerprinting apply policy <profile_name> <port-number>

Description

Configures the device fingerprinting profile on a port or port list.

NOTE:

Device fingerprinting cannot be completed until the profile is applied on a port or port list.

The no form of this command removes the device fingerprinting profile from the port list.

Command context

config

Parameters

profile_name

Specifies the profile name.

port_number

Specifies the port number on which the profile has to be applied.

Usage

  • device-fingerprinting apply policy <profile_name> [PORT-LIST {list}]

Examples

switch(config)# device-fingerprinting apply
policy                Enter the profile name.
switch(config)# device-fingerprinting apply policy test
[ethernet] PORT-LIST  Enter a port number, a list of ports or 'all' for all ports.
switch(config)# device-fingerprinting apply policy test 1
switch(config)# device-fingerprinting apply policy test 2
switch(config)# device-fingerprinting apply policy test 3
switch(config)# device-fingerprinting apply policy test 10
switch(config)# device-fingerprinting apply policy test1 4
switch(config)# device-fingerprinting apply policy test1 5
switch(config)# device-fingerprinting apply policy test2 6
switch(config)# device-fingerprinting apply policy test2 7
switch(config)# device-fingerprinting apply policy test2 8