Locating LED behavior in stacking system
Switch LED |
State |
Meaning |
|---|---|---|
Locator(blue) Standalone commander ChassisLocate On | Off | Blink |
On-Blinking-Off |
The Locator LED is used to identify a specific switch in the network equipment installation. The LED can be set to Solid or Blink, and for a specified number of minutes (1-1440). Default: 30 minutes. Use
|
Locator in 4 member stack Locating specific stacking Member Chassis Locate Member <No> On | Off | Blink |
On-Blinking-Off |
Locator LED is used to locate specific stacking member in stacking. |
Locator in 4 member stack Global command to locate all the members in stack. ChassisLocate On | Off | Blink |
On-Blinking-Off |
Locator LED is used to locate specific stacking member in stacking. |
Locator behavior in various member states |
Standby rebooting in the middle of locate LED duration. |
After bootup, standby indicates Locator, if it was indicating before reboot. |
Member rebooting in the middle of locate LED duration. |
After bootup, member indicates Locator, if it was indicating before reboot. |
|
Member removed in the middle of locate LED duration. |
After member is removed, it boots up as standalone member and does not indicate Locator LED. |
|
Stack split and merge |
Locate LED indication is restored once merged back into stack. |
- Unsupported XCVR behavior
When unsupported transceiver is installed or hotswapped on the VSF reserved port, it flashes slow orange, indicating that the transceiver has failed validation
- Port or Link LED behavior
When VSF is reserved, it flashes solid orange, indicating port state as reserved, but moves on to flash green, showing activity when linked up successfully.
- Mode LED set to PoE on VSF enabled Port
PoE is disabled by default on VSF port, hence it indicates slow flash orange on VSF port when POE mode LED is selected.