show command

Use the following show command to display the different mac-notify traps configured on an interface:

Syntax:

Switch # show mac-notify traps

Displays the following information:

Mac Notify Trap Information
Mac-notify Enabled : No
Mac-move Enabled : No
Trap-interval : 30
Port   MAC Addresses trap learned/removed/aged
------ ---------------------------------------
1       Learned, Removed & Aged
2            Removed & Aged
3            Learned & Aged
4            Learned & Removed
5            Aged
6            Learned
7            Removed

Example:

For port 1 the command would be as follows

Switch # show mac-notify traps 1

Displays the following information:

1 Aged